Please note we will be closed for restructuring and stock intake from 4th May until the 10th May inclusive. We apologise for any inconvenience this may cause but the aim is to ultimately provide an improved service. All pending orders will be processed as normal during this time.

We are currently unable to dispatch to Northern Ireland.


Ventilation Ducting  | Rectangular Ductwork | Tapers | Offset Taper | 600mm |  350mm

600mm Width x 350mm Depth Offset Taper

Use the drop down menus below to select the width out, and connections.

If you wish to specify a certain total length for the taper please use the 'Other info' box below (there may be an extra charge if there is a substantial divergence from the default length).

Connections A and B refer to the connection methods to be used on either end of the taper. Doby frames or slip joints are standard connections for duct assembly. Sheet metal flanges are not a general connection method but can be useful when connecting to walls or ventilation equipment.

Although selectable on all sizes - and possibly necessary on your particular installation - we do not recommend slip joints for general duct assembly on ducts over 400mm in any one dimension.

Width out

Connection A

Connection B

Any other info or specific requirement (optional):



People who bought this item also bought:
1. Sheet Angles (Ref: SAN)
2. 350mm Width x 600mm Depth Offset Taper (Ref: TFTPR350-600)
3. Acoustic Foam 2x1m Sheets - 25mm - Class O (Ref: CC400-VAF-S-25)
600mm Width x 350mm Depth Offset Taper

Your Basket


View BasketCheckout
Best Sellers

100 dia 90° Pressed Bends with Seals

100 dia 90 Pressed Bends with Seals


600mm 30x30 Cantilever Support

600mm 30x30 Cantilever Support


PU S1 Clear Extraction Hose 10m Length

PU S1 Clear Extraction Hose 10m Length

M8 Back Plate Threaded Rod Hanger

M8 Back Plate Threaded Rod Hanger


100mm dia Chrome Exhaust Valve

100mm dia Chrome Exhaust Valve