Tapers

Ventilation Ducting | Rectangular Ducting & Manufactured | Tapers

Tapers

This section is under construction and not yet operational

Manufactured from 0.7mm galvanised mild steel.

Use the first drop down to select the larger end of the taper, and the second to select the smaller end. The larger end selection must be larger than the smaller end selection, otherwise the price will be wrong and we won't send it out. Use the link below for some important information regarding tapers.

Please use the 'Any other info' box to fine tune the size if necessary.

Info on the choices on this page..

End A (larger end)

End B (smaller end)

Style

Equal

Offset (at least 1 flat side)

Joint method

Flanges

Flanges loose

Slip-joint

Nothing - plain ends

Any other info or specific requirement (optional):

Quantity:

Items:
Value:

Best Sellers

Spiral Tube - Single 3m Lengths

Galvanised spiral tube. Available in 3 metre lengths. See drop-down menu for all sizes ...
find out more

Foil Plain Flexible Ducting

See drop-down menu for all sizes and corresponding prices. Prices stated are per boxed ...
find out more

90 Degree Bends

!!<>!!Mild Steel Zinc-plated. Typically pressed construction up to 250mm diameter; fabricated in ...
find out more

Air Exhaust Valves

Supplied with long mounting ring to facilitate simple connection to rigid and flexible ducts. ...
find out more

Male Couplers

Zinc-plated mild steel. Male couplers facilitate the joining of two lengths of spiral tube ducting. ...
find out more